FT Advertising
FT Rui
| Copy Deadlines: | One month before publication | |
| Production Contacts: | Mainland China - Stella Yu, Sales Assistant International - Venus Ho, Luxury Sales & Partnerships Executive |
|
| Copy Material required: | High resolution Acrobat Distiller PDF and proof. Supplied proof must be generated from the final PDF supplied with the correct ICC profile. Please send two sets of proof to above contacts, 2 weeks before publication. | |
| PDF Specification: | PDF/X-1A. Full spec for PDF file creation can be found at www.pass4press.com | |
| Proof Specification: | ICC profile for IFC, IBC & OBC - Coated FOGRA39 (ISO 12647-2:2004) ICC profile for inside page - Coated FOGRA27 (ISO 12647-2:2004) The required ICC profile can be obtained from the Adobe website http://www.adobe.com/support/downloads/detail.jsp?ftpID=3680. Please supply the colour with control bar and verification. |
|
| File Supply | ||
| FTP: ftp.ftrui.com |
Username: ftrui | Password: ft20080527 |
| Port: 21 | Protocol: ftp | *Confirmation email to be sent to above contacts following copy upload to FTP site. |
Copy Dimensions — Height x Width |
||
Size |
Trim Size |
Bleed Size |
DPS |
280mm x 430mm |
290mm x 440mm |
Full Page |
280mm x 215mm |
290mm x 225mm |
Half Page Horizontal |
140mm x 215mm |
150mm x 225mm |
Half Page Vertical |
280mm x 103mm |
290mm x 113mm |
1/3 Page Horizontal |
94mm x 215mm |
100mm x 221mm |
1/3 Page Vertical |
280mm x 72mm |
286mm x 78mm |
| Live matter area: | For inside front and back DPS, the type matter must be positioned at least 7mm within specified trim size, with a 14mm gutter. For normal DPS, the type matter must be positioned at least 5mm within specified trim size, with a 10mm gutter. For other page, the type matter must be positioned at least 5mm within specified trim size. |
| Printing process: | Printed heatset Web-offset on coated white paper. |
| Screen ruling: | 150 lines per inch (60 lines per cm). |
| Halftone range: | Highlight - 5%. Shadow - 90% maximum. |
| Under Colour Removal: | The sum of the percentage screen in solid areas should not exceed 300%. |
